manualshive.com logo in svg

Polaris Slingshot 2015, Owner'S Manual, Page: 131 / 136

Share
Download
Polaris Slingshot 2015 Owner'S Manual Download Page 131

129

AUDIO SYSTEM

Screen Display Settings

The screen display diagnostic menu allows the following actions for you or your 
SLINGSHOT dealer:

• Adjust backlighting
• Set DAY/NIGHT/AUTO mode
• Adjust button display modes

1. To access the display settings, press and hold 

MUTE

.

2. Press 

VOL+

 to display software information.

3. Press 

VOL+

 to return to the display settings screen. 

4. Press 

MODE

 to save any changes and exit.

Backlighting Display Settings

1. Press and release 

TUNE+

 to cycle 

through DAY/NIGHT/AUTO modes.

2. Press and release 

TUNE-

 or 

PRESET 

to adjust the screen brightness in each 
mode.

3. With Auto mode on, press 

MUTE

 or 

 

PHONE 

to adjust the DAY/NIGHT 

light transition point.

Button Display Settings

Press 

VOL-

 to scroll through button display modes:

OFF:

Button text does not display on screen

ON:

Button text displays on screen at all times

ON NIGHT:

Button text displays at all times in NIGHT MODE only

SLIDE:

Button text slides out to display when any button is pressed

SLIDE NIGHT:

Button text slides out to display in NIGHT MODE only

Summary of Contents for Slingshot 2015









































































































































Reviews:

No comments