Polaris PVCR 3300 IQ Home Aqua, Operation Manual, Page: 76 / 185

76
4.
Dust container
5.
Dust container lid
WET CLEANUP CONTAINER
Fig. 4
1.
Water fill lid
2.
Tank
3.
Wet cleanup microfiber
REMOTE CONTROL UNIT
Fig. 5
1.
Main cleanup mode
2.
Start/stop button, confirmation button
3.
Suction power adjustment button
4.
Wall-along cleanup mode
5.
ON/OFF button
6.
Display
7.
Home button
8.
Motion direction, "hours/minutes" setting buttons
9.
Time setting mode selection button
10.
Cleanup schedule setting mode selection button
DELIVERY SET
1. Robotic vacuum cleaner assembly - 1 pc.
2. Dust container (installed) - 1 pc.
3. Wet cleanup container with microfibre - 1 pc.
4. Battery (installed) - 1 pc.
5. Charge base - 1 pc.
6. Batteries AAA (included) – 2 pcs
7. Charger (adapter) - 1 pc.
8. Side brushes (not installed): the right brush - 2 pc.; the left brush - 2 pc.
9. Spare set of HEPA-filter - 1 pc.
10. Cleaning brush - 1 pc.
11. Spare microfibre for wet cleanup - 1 pc.
12. Remote control unit - 1 pc.
13. Operation manual - 1 pc.
14. Warranty sheet - 1 pc.
15. Package (polyethylene bag + box) - 1 pc.
APPLIANCE UNPACKING AND COMMISSIONING

Open the box, carefully extract the appliance, free it from the packaging materials.

Remove advertising sticks from the appliance body.

Check the delivery set (see "Delivery Set" Chapter).

Extract all the accessories and the charger.

Check all the accessories for damage.

Install the side brushes. For this, position the vacuum cleaner upside down. Put each of brushes on its
axle: L (white dor) is the left one, R (yellow dot) - is the right one, by slightly pushing downward until
stop.
Side brushes installation
Fig. 6