Polaris PRE 0912, Manual Instruction

Page: 10 / 13

IV. Before use
Get the radiator out of the box and place it on the foam plastic cover. Make sure whether the power cable and
the device were not damaged during the transportation.
Do not operate the radiator if there are any damages.
Attention!
The radiator should always be placed in vertical position to reduce the risk of overheating, fire or electric
shock.
V. The radiator operation
Make sure that the horizontal surface on which the radiator is placed is firm and steady and there
are no any inflammable objects in the distance of 1 metre.

Before plugging the device in outlet, please make sure, that the power control is in the “0”OFF position
and the thermostat control in the “MIN” position.

Please rotate clockwise the thermostat controller up to «MAX» position. Use the power regulator to
choose the required temperature: I position – low power, II position – medium power and when two
regulators are switched on – high power mode.
Regulator
position
Power
PRE O 0709 PRE O 0912
0-0 0 0
I 400 W 500 W
II 500 W 700 W
I+II 900 W 1200 W

If you want to keep the constant temperature, please rotate the thermostat controller anti-clockwise until
the indicator go out (or until the click). From this moment, the radiator will continue to work
automatically keeping the constant temperature using efficiently the electric power.

If you want to change the temperature please rotate the thermostat controller clockwise – to make the
temperature go up, anti-clockwise – to make the temperature go down.

If you want to turn off the radiator, please switch all controllers to OFF position.
NOTE: If the temperature of the room is below the temperature chosen by the thermostat the radiator
works and the indicator is on. If the room temperature reaches the temperature chosen by
thermostat the radiator stops automatically.
I
II
I+II