INDICATOR LIGHTS
Indicator lights on the handlebar console
illuminate when neutral or reverse gears are
selected. The neutral indicator
q
is green. The
reverse indicator
w
is amber.
KICK-START LEVER
If the battery becomes too weak to start the engine, use the kick-start lever to
start the engine until the battery is serviced.
1. Position the vehicle on a level surface.
2. Lock the parking brake.
3. Place the transmission in neutral (N).
4. Fold out the kick-start lever
q
on the left side of the vehicle.
5. Make sure the engine stop switch and main key switch are in the ON
position.
6. Place your foot on the kick-start. Thrust your heel downward to crank the
engine.
7. If the engine is cold, use the choke as outlined on page 29.
8. After the engine has started, fold the kick-start lever back into place.
TIP
A 10/12 mm wrench is provided in the tool kit for removing or installing the
lever. If not installed, make sure the rubber cap is installed on the kick-start
shaft to protect the rider. Store the kick-start lever under the seat in the rear
cab when not installed.
33
FEATURES AND CONTROLS
Summary of Contents for Phoenix 200
