9.
In order to turn the appliance off, you should press the “POWER” button
(7) one more time.
10.
Oscillation function.
When you press the “
OSC
”
(6) button, the body of the appliance starts
to revolve on the vertical axis. This let you to warm the room in better way. In order to turn the
function off, you should press the “
OSC
”
(6) function one more time.
11.
Timer function.
This function let you set the time of heater work from 1 till 8 hours. Each
pressing on the button
adds 1 hour to the working time. If there is already set 8 hours for timer
and you press the button
one more time, the timer turns off and the appliance will work
continuously.
12.
Set temperature maintenance
. Set the required temperature pressing buttons “+” or “-”. When
you press the “+” or “-” buttons, the set temperature and
symbol will be lighted on the display. If
the outer temperature is higher, then the set temperature, the heater will be turned off. And on the
contrary, if the outer temperature is lower, then the set one, the set one, the heater will be turned
on. This function will be turned off, if you press the button
and if you will switch the power
mode into the low mode
.
13.
Remote control
. The control over all the functions is available from the control panel and from
the remote control also.
-
Before you start using of the RC, please, insert 2 batteries of “AAA” type.
-
Do not use old and
new batteries at the same
time as well as batteries of
different types.
14.
Protection function
. The
heater has two levels of
protection.
-
The protection from the overheating. In order to turn on the heater after the snapping this protection
into action, you should plug the heater out from the power line, let it get cool for 10 minutes. Then turn
it on according to manual instruction.
-
The protection against the overturning.
VI. Cleaning and maintaining.
Before cleaning unplug the appliance and let it get cool. Wipe it with soft wet cloth. Don’t use solvents
or abrasives.
You should regularly clean, wipe the dust from the appliance for the dust negatively effects on the
operation of the wall heater.
Don’t scrape the body with hard instrument.
Front view
Back view