10
2.6.1 If the hose is too long = Cut the feed hose
• Don't cut the lead hose : it must stay the equal to the depth of the pool, see
"2.3 I Adjusti ng
the lead hose".
•
Remove the quick disconnect from the sucti on port
: simultaneously unscrew and pull.
See picture
.
•
Unscrew the swivel to separate the feed hose into two equal secti ons,
see picture
and
.
•
Cut the excess length,
for example : 0.50 cm
, by removing the same amount from each of these two secti ons,
i.e.
0.25 cm on each secti on (in the example shown)
,
see picture
.
•
Assemble the two feed hose's secti ons using the swivel and att ach clamps,
see picture
.
•
Adjust the distance between each fl oat on the feed hose; the recommended distance between each fl oat is
45 to
90 cm
. Slide the fl oats on the hose to positi on them,
see picture
.
Sucti on port
connecti on
Lead hose
connecti on
Feed hose (secti on 1)
Feed hose (secti on 2)
0.25 cm
(for exemple)
0.25 cm
(for exemple)
Recommended
Lead hose
connecti on
Sucti on
port
connecti on
Feed hose (secti on 1)
Feed hose (secti on 2)
2.6.2 If the hose is too short = add a secti on of feed hose
•
Purchase an additi onal hose secti on, a swivel and two hose att ach clamps from your retailer.
•
Cut the new secti on if necessary, see
"2.6.1 If the hose is too long = Cut the feed hose".
EN