NRX-4
-
The Two Line Telephone with Conference Facility
5
2.6 Programming Memory Buttons
There are 10 memory locations in the NRX 4 telephone, which can be used to store
important telephone numbers. The following is an example of storing a number in
one of the locations:
1. Lift the handset or press the 'Speaker" button once.
2. Press the 'PROGRAM' button. (This is concealed under memory label).
3. Enter the telephone number for storing. After the number has been entered,
press the 'PROGRAM' button again.
4. Select one of the direct memory locations for storing the number at
that location.
5. Repeat steps 2 to 4 for successively storing more than one telephone
number. When all numbers have been stored replace the handset.
The programming can be enabled and disabled by means of the following key
sequence:
1.1
To disable the programming [STORE] [VOL UP] [STORE] [0].
1.2
To enable the programming [STORE] [VOL UP] [STORE] [1]
2.7 Memory Dialling
To dial a telephone number that has been stored in one of the direct memory
locations
1. Lift the handset or press the 'Speakerphone' button.
2. When you hear the dial tone, press one of the memory location buttons.
2.8 Privacy (Muting the Microphone during Conversation)
During a telephone conversation, you may switch off the microphone in the handset
by pressing the Mute button on the handset. As long as the handset Mute button
is pressed, the microphone mute function is activated. Releasing the handset Mute
button will re-enable the microphone for conversation.
2.9 Modem/Data Connection Socket
The NRX4 telephone has an additional socket marked MODEM, which allows the
user to connect an extra telephone, modem or fax machine to the telephone line.
This socket is at the back panel of the base cabinet and has a removable plastic cover.
7923 NRX4_Brochure2.qxd 8/12/2003 2:08 PM Page 5
