Polaris NRX-2H User Manual Download Page 8 | Manualshive

Page: 8 / 10

Polaris NRX-2H User Manual Download Page 8

NRX-2H

-

The telephone for the corporate user

8

2.13 Adjustable Ringing Volume

On the right of the unit is a switch, this adjusts the ringing volume of incoming calls.
From left to right it has three positions: off, low, high. Move the switch to the position
you require. In addition to the ringing tone there is a Ring Indicator Lamp on the unit
that will flash when the telephone is ringing as a visual indication. The Ringer
Switchdoes not control this Ring Indicator Lamp.

2.14 Adjustable Ringing Tone Pitch

On the right of the unit, there is also a switch that adjusts the ringing pitch of
incoming calls. From left to right it has three positions: low, medium and high. Move
the switch to the position you require.

2.15 Headset Facility

The ‘Headset / OHD’ button enables you to use the telephone without lifting the
handset. Connect a headset and simply press the ‘Headset’ button once to connect
to the line. Pressing the ‘Headset / OHD’ button again will disconnect the telephone
line and terminate the call.During a headset (handsfree) conversation, lifting the
handset will switch the unit to the handset mode. The headset will be disabled and
the handset should be used for conversation instead. The headset mode will be
activated again by pressing the ‘Headset / OHD’ button and replacing the handset.

2.16 On Hook Dialing

Pressing the ‘Headset / OHD’ button when a headset is not connected to the tele-
phone, enables the user to dial without having to lift the handset. Once the call has
been connected, the handset should be lifted to speak.

2.17 Hearing – aid compatibility

The handset receiver is hearing aid compatible.

3. WALL-MOUNTING THE UNIT

The NRX-2H can be wall mounted using the wall mount bracket installed on the bot-
tom of the unit.

●

Dismount the wall mount bracket from the unit

●

Place the wall mount bracket to the required position on the wall

●

Drill two holes on the wall according to the distance as marked by two mounting holes.

●

Install the two screws supplied with the unit in the wall

●

Re-install the wall mount bracket to the bottom cabinet for the wall mount position.

●

Position the wall mount slots on the bracket of the unit over the two screws on the

wall. Pull down and lock into place.

9091 NRX-2H_User Guide.qxd 8/12/2003 2:09 PM Page 8

«
...
6
7
8
9
10
»

Summary of Contents for NRX-2H











Reviews:

No comments