manualshive.com logo in svg

Polaris M1400, Owner'S Manual

Share
Download
Polaris M1400 Owner'S Manual Download Page 33

31

OPERATION

Driving Procedure

1. All riders should wear substantial foot-

wear, long pants and a close-fitting shirt. 
A hard hat or helmet and approved eye 
protection are recommended when appro-
priate for working or riding conditions.

2. Sit in the driver's seat.

3. Start the engine and allow it to warm up.

4. Apply the service brakes and shift the 

transmission into gear.

5. Check your surroundings and determine 

your path of travel.

6. Keeping both hands on the steering wheel, release the brake pedal and gradually push 

the throttle toward the floor to begin driving.

7. Drive slowly. Practice maneuvering and using the throttle and brakes on level surfaces.

8. Do not carry a passenger until you have at least two hours of driving experience with this 

vehicle. Never carry more than one passenger in this vehicle. Never allow a passenger to 
ride in the cargo box.

9. To stop the vehicle, release the throttle pedal completely and brake to a complete stop.

Tip:

Always come to a complete stop before reversing direction.

10. Place the transmission in PARK.

11. Turn the key off.

WARNING!

A rolling vehicle can cause serious injury. Remove the key when leaving the vehicle 

unattended.

Summary of Contents for M1400






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands