Polaris BRUTUS HD, Operator'S Handbook Manual

Page: 9 / 14

9925252 9
AUXILIARY HYDRAULIC CONTROL
INSTALLING THE PTO DRIVELINE (If Equipped)
See Owner’s Manual for more information.
Auxiliary Operation:
Press switch (Item 1) to the left to
activate the female coupler. Press
switch (Item 1) to the right to
activate the male coupler.
Relieving Hydraulic Pressure:
With engine stopped (key switch
ON) and attachment flat on
ground, move auxiliary hydraulic
switch (Item 1) to the right and
left several times.
NA5909
1
Tip: The PTO has a rated speed of
2000 RPM.
1. Install the attachment on the
interface. See Page 8.
2. Connect the PTO driveline
(Item 1) to the utility vehicle
PTO shaft.
Tip: The PTO driveline must have a
means to retain it to the
attachment PTO shaft. Make
sure the driveline is of
adequate length and that the u-
joints are in the correct phase.
NA5913
1
IMPORTANT
Do not exceed the rated attachment
PTO speed of 2000 RPM. Damage
to the attachment could occur from
over speeding. Disengage PTO for
road travel.
WARNING
AVOID INJURY OR DEATH
• Keep PTO shields and all guards
in place.
• Keep hands, legs, feet and
clothing away.
• Replace damaged or missing
shields and guards.