background image

97

MAINTENANCE

Air Filter

Always clean all dirt and debris away from the air box area before 
servicing the air filter. Always change the air filter at the intervals 
outlined in the Periodic Maintenance Chart beginning on page 75.

1. Remove the cargo box access 

panel.

2. Clean all dirt and debris from 

the air box area.

3. Unlatch the two air box 

cover straps and carefully 
remove the air box cover.

4. Inspect the air filter and air 

box for dirt, debris or water.

5. To remove the filter, slide the 

filter toward the passenger's 
side of the vehicle.

6. With the filter removed, 

clean the intake tube and air 
box thoroughly. Wipe well 
with a clean, dry cloth.

NOTICE:

Dirt or debris in the intake 
tube could result in severe 
engine damage. Always 
clean all dirt and debris 
from the intake tube 
before installing the filter.

7. Reinstall the air filter (if clean) or install a new air filter (if soiled). 

Do not attempt to clean the air filter. 

NOTICE:

Use of a non-POLARIS-approved air filter may cause engine 
damage. Replacement filters are available at your POLARIS 
dealership.

8. Make sure that there are no gaps between the filter and the left side 

of the air box.

9. Reinstall the air box cover. Make sure the tabs are properly 

positioned into the hinge.

10. Secure the cover straps.

11. Reinstall the cargo box access panel.

Cover Straps

Air Filter

Summary of Contents for ACE 900 SP














































































































































Reviews: