manualshive.com logo in svg

Polaris 600 INDY VOYAGEUR 2016, Owner'S Manual

The Polaris 600 INDY VOYAGEUR 2016 is a powerful and reliable snowmobile designed for adventure seekers. To ensure a smooth and hassle-free ownership experience, make sure to download the free Owner's Manual from manualshive.com, providing comprehensive instructions and maintenance details. Don't miss out on this essential manual for your Polaris 600 INDY VOYAGEUR 2016.

Share
Download
background image

12

SAFETY

Operator Safety

Disabled Operators

Safe operation of this rider-active vehicle requires good judgement and 
physical skills. Operators with cognitive or physical disabilities have an 
increased risk of loss of control, which could result in serious injury or 
death.

Survival Preparation

For your safety, always ride in a group of other snowmobilers. Always 
tell someone where you're going and how long you expect to be gone. If 
it isn't possible to ride with others, and you must travel into remote 
areas, always carry survival equipment that's appropriate to the 
conditions you may encounter. Such equipment may include, but is not 
limited to: extra clothing, a sleeping bag, a flashlight, food and water, a 
signaling mirror, a means of building a fire, and a two-way radio or 
cellular telephone.

Always carry the owner’s manual on your snowmobile. For added 
protection, purchase and carry the following items on your snowmobile 
as well:

• Spare Drive Belt

• Winter Survival Kit

• Extra Set of Spark Plugs

• Trail Map

• Tow  Rope

• First  Aid  Kit

• Extra Oil

• Tool Kit

• Fuel Deicer

Summary of Contents for 600 INDY VOYAGEUR 2016











































































































































Reviews:

No comments

Related manuals for 600 INDY VOYAGEUR 2016

Brands by name

Popular brands

Load more brands