Polaris 550 Indy 2022 Owner'S Manual Download

Page: 50 / 162

HANDLEBAR ADJUSTMENTS

HANDLEBAR ANGLE

1. Securing the handlebar clamp bolts

with an Allen wrench, loosen each of

the four nuts (located on each bolt’s opposite end).

CAUTION

Take care to avoid damaging hand warmer/brake switch wires when moving

components.

2. Adjust the handlebar forward or rearward to the desired angle.

3. Be sure the handlebar, brake lever and throttle lever operate smoothly and

do not hit the gas tank, windshield or any other part of the machine when
turned fully to the left or right. If necessary, adjust the left and right hand
controls. See page 46.

4. Tighten the handlebar clamp nuts. Do not over-torque.

TORQUE

Handlebar Clamp Nuts

7 ft-lbs (9.5 N·m)

THE PERFECT FIT

Downloaded from

ManualsNet.com

search engine

Summary of Contents for 550 Indy 2022



































































































































































Search results

Summary of Contents for 550 Indy 2022

Reviews:

Related manuals for 550 Indy 2022

Brands by name

Popular brands

Polaris 550 Indy 2022, Owner'S Manual

Search results

Summary of Contents for 550 Indy 2022

Reviews:

Related manuals for 550 Indy 2022

Brands by name

Popular brands