Instr 9927801
Rev 01 2016-07
Page 2 of 2
INSTALLATION INSTRUCTIONS
NOTE
Polaris undercover is a soft, protective, removable,
washable 100% polyester cover. Please wash
undercover whenever it becomes dirty. Dirt and grit
will harm the surface of your machine.
1. Park the machine and turn the key to 'OFF'
position. Remove the key from the vehicle.
2. Drape the undercover
q
over the front of the
machine then pull the elasticized edge over the
windshield as shown.
3. Use the side release buckle straps (A) sewn to the
cover to secure undercover down. Feed the
webbing strap down through the footwell (B) as
shown and connect the buckles.
Cinch tight by pulling any excess slack (C).
CAUTION
Never trailer covered unit with just the undercover
q
installed.
