Instr 9926164
Rev 02 11/15
Page 3 of 3
c. Using lower panel
a
as template, drill five 5/16
inch holes through upper rear close off panel.
Install five plastic push rivets
h
through lower
panel
a
and upper rear close off panel as
shown.
IMPORTANT
Control drill depth to prevent damage to underlying
structure or components.
3.
Install Upper Panel
a. Turn two handles
o
on upper panel
t
so they
are in unlocked position (parallel with upper
roof edge) as shown.
b. Install upper panel
t
by engaging lower
brackets
y
on lower ROPS as shown. Pivot
panel into ROPS, then turn handles
o
to
locked position (perpendicular to upper roof
edge) as shown.
NOTE
Tighten bolts
q
as required to achieve desired level
of handle resistance.
