7515286-458E
A-7515286 Rev. A
EXTREME FRONT BUMPER
KIT PN 2879201
- 3-
Printed in China
5
10
7. Position and fasten the assembly upper section
e
onto the lower middle section
j
using
(2) M6-1.0 X
20 mm
Allen socket machine screws
b
and
(2) M6
flat
washers
d
.
8. Fasten the left
k
and right
l
supports to the
vehicle using the two existing M10-1.5 bolts and the
two existing M10-1.5 nuts removed in
step 2
(finger
tighten at this time).
10. Tighten all bolts, machine screws, and nuts.
11. If you removed a roller guide in
step 1
, reinstall it.
The mounting
holes on the top of
the upper middle
section
e
are used
to the installation of
accessory lights (see
the Polaris accessory
catalog).
9. Position and fasten the lower left
h
and right
i
tubes using
(8) M6-1.0 X 20 mm
Allen socket machine
screws
b
and
(8) M6
flat washers
d
.
6. Preassemble the upper left
f
and right
g
sections
onto the upper middle section
e
using
(12) M6-1.0 X
20 mm
Allen socket machine screws
b
and
(12) M6
flat washers
d
(finger tighten at this time).
6
5
7