-2-
3. Install roof top by sliding canvas into the channel in
the metal roof strip. Figures 4 and 5.
Figure 4
Figure 5
Channel
Roof
Slide Roof into Channel in
the Front of Vehicle
Figure 6
4. Install the metal snaps using #6 machine screws
and #6 nylok nuts using metric end wrenches and
a Phillips screwdriver. The holes are located in the
rear-upper frame of the vehicle and correspond to
the snap location on the roof. Figure 6.
Figure 2
2. Remove protective film from adhesive foam on metal header strip. Align holes in metal strip with the holes
in frame. Install metal strip onto front of vehicle with four bolts using a Allen wrench. Figure 2.
IMPORTANT: If installing roof with a tip out windshield, set the windshield in place on vehicle, install metal
strip then bracket hinge, fasten with bolts and nuts. Figure 3.
Figure 3
Metal Strip
Bolts
Bracket Hinge
Snap Installed
Snap Locations
