Polaris 2015 RZR XP 1000 EPS Owner'S Manual Download

Page: 105 / 150

103

MAINTENANCE

Filter Systems

Air Filter

6. With the filter removed, clean the intake tube and air box

thoroughly. Wipe well with a clean, dry cloth.

NOTICE:

Dirt or debris in the intake tube could result in severe engine
damage. Always clean all dirt and debris from the intake tube before
installing the filter.

7. Reinstall the air filter (if clean) or install a new air filter (if soiled).

Do not attempt to clean the air filter.

NOTICE:

Use of a non-POLARIS-approved air filter may cause engine
damage. Always use a POLARIS-approved replacement filter.
Please see your POLARIS dealer.

8. Make sure that there are no gaps between the filter, the filter ring

and the stop on the intake tube.

9. Reinstall the air box cover and ensure the alignment tabs are

properly positioned.

10. Secure the six (6) cover clips.

11. Reinstall the cargo box access panel.

Summary of Contents for 2015 RZR XP 1000 EPS























































































































































Search results

Summary of Contents for 2015 RZR XP 1000 EPS

Reviews:

Related manuals for 2015 RZR XP 1000 EPS

Brands by name

Popular brands

Polaris 2015 RZR XP 1000 EPS, Owner'S Manual

Search results

Summary of Contents for 2015 RZR XP 1000 EPS

Reviews:

Related manuals for 2015 RZR XP 1000 EPS

Brands by name

Popular brands