2.30
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
BRAKE SYSTEM
Brake System Inspection
The following checks are recommended to keep the
brake system in good operating condition. Service life of
brake
system
components
depends
on
operating
conditions. Inspect brakes in accordance with the
maintenance schedule and before each ride.
• Keep fluid level in the master cylinder reservoir to
the indicated level inside reservoir.
• Use Polaris DOT 4 Brake Fluid
Use Polaris DOT 4 Brake Fluid
• Check brake for excessive travel or spongy feel.
• Check brake system for fluid leaks.
• Check
friction
pads
for
wear,
damage
or
looseness.
• Check surface condition of the disc.
Brake Pad Inspection
Pads should be changed when the friction material is
worn to
.180” / 4.6 mm
, or about the thickness of a dime.
Brake Pad Service Limit:
.180" (4.6 mm)
Hose/Fitting Inspection
Check brake system hoses and fittings for cracks,
deterioration, abrasion, and leaks. Tighten any loose
fittings and replace any worn or damaged parts.
MAINTENANCE
