Polaris 2007 MV700, Owner'S Manual For Maintenance And Safety

Page: 79 / 131

76
MAINTENANCE
Engine Cooling System
To ensure that the coolant maintains its ability to protect the engine,
Polaris recommends that you drain the system completely every two
years and add a fresh mixture of antifreeze and water.
Polaris recommends the use of Polaris Premium 60/40
anti-freeze/coolant or a 50/50 mixture of high quality aluminum
compatible anti-freeze/coolant and distilled water. Polaris Premium
60/40 is already premixed and ready to use. Do not dilute with water.
See page 111 for the part numbers of Polaris products.
NOTE: Always follow the manufacturer’s mixing recommendations
for the freeze protection required in your area.
Any time the cooling system has been drained for maintenance or
repair, replace the coolant. If the recovery bottle has run dry, the level
in the radiator should be inspected. Add coolant as needed.
WARNING
Escaping steam can cause severe burns. Never remove the
pressure cap while the engine is warm or hot. Always allow the
engine to cool before removing the pressure cap.