Polaris 2004 SPORTSMAN Owner'S Manual Download Page 11

Page: 11 / 137

SAFETY

Safety Decals and Locations

Moving parts hazard under belt-clutch guard. To

prevent serious injury, do not operate vehicle with

guard removed.
Do not modify engine or clutch. Doing so can cause

part failure, possible imbalance, and excessive engine

RPM which can result in serious injury or death.

NO STEP

7078689

WARNING

DO NOT TOW FROM RACK OR BUMPER.

Vehicle damage or tipover may result causing severe injury

or death. Tow only from tow hooks or hitch.

Max Rack Loads: Front 100 lbs. (45 kg) Rear 200 lbs. (91 kg)

7170912

WARNING

DO NOT TOW FROM RACK OR BUMPER.

Vehicle damage or tipover may result causing severe injury

or death. Tow only from tow hooks or hitch.

Max Rack Loads: Front 90 lbs. (41 kg) Rear 180 lbs. (82 kg)

7170021

WARNING

Sportsman 400/500

Sportsman 600/700

Summary of Contents for 2004 SPORTSMAN










































































































































Search results

Summary of Contents for 2004 SPORTSMAN

Reviews:

Related manuals for 2004 SPORTSMAN

Brands by name

Popular brands

Polaris 2004 SPORTSMAN, Owner'S Manual

Search results

Summary of Contents for 2004 SPORTSMAN

Reviews:

Related manuals for 2004 SPORTSMAN

Brands by name

Popular brands