Setting up your Machine
3. You will need to ensure that there
is a clearance of 20cm at the back
and both sides of the machine. This
will ensure that the machine has
enough room for ventilation. If the
machine
overheats,
it
won’t
function effectively.
4. Take the drip trays out of the clear
bowls, and position at the bottom of
the front panel. Make sure that the
clear overflow pipe is tucked into
the back of the tray.
5. Remove the taps from the bowls
and lubricate the shafts
with
lubricant. Then simply push them into
place in the tap tubes until you hear a
click.
1. Position your machine where you will be using it. Your machine
will need to have a 240 volt electric power supply.
2. Plug the machine into the mains.
overflow
pipe