ENGLISH
This user manual contains instructions for Polar
WearLink® 31 and Polar WearLink® W.I.N.D.
transmitters. The model of your transmitter is
printed on the connector.
Please follow the pictures on the front cover.
Transmitter Parts
1.
The electrode areas on the reverse side of
the strap detect heart rate. Picture A1.
2.
The connector sends the heart rate signal to
the wrist unit. Picture A2.
Wear the Transmitter
1.
Wet the electrode areas of the strap under
running water and make sure that they are
well moistened. Picture B1.
2.
Attach the connector to the strap. Adjust
the strap length to fit snugly and
comfortably. Picture B2.
3.
Tie the strap around your chest, just below
the chest muscles, and attach the hook to
the other end of the strap. Picture B3.
4.
Check that the wet electrode areas are
firmly against your skin and that the Polar
logo of the connector is in a central,
upright position. Picture B4.
Detach the transmitter connector from the
strap and rinse the strap under running water
after every use.
The Polar WearLink connector can be used
with specific apparel with built-in soft textile
electrodes. Wet the electrodes and clip the
connector onto the apparel without the strap,
with the Polar logo in an upright position.
E N G L I S H
1
Summary of Contents for WearLink plus W.I.N.D.
Page 2: ...A1 A2 B4 B3 B2 B1 C...
