Teach a New Stride Sensor to Your Wrist
Unit
Your new s3 stride sensor must be introduced to
your Polar product in order to analyze your
running technique and efficiency. This is called
teaching. For further information, refer to the
user manual or go to www.polar.fi -> support.
Attach Stride Sensor on Shoelaces
1.
Undo the flap and detach the fork (see
picture 4).
2.
Loosen your shoelaces and place the fork
underneath them, on top of the tongue of
the shoe (see picture 5).
3.
Tighten the laces.
4.
Fit the front part of the sensor onto the
fork and press from the rear (see picture
6). Fasten the flap.
5.
Make sure the sensor does not move and
is aligned with your foot. The more secure
the sensor, the more accurately speed
and distance is measured.
Attach Stride Sensor in Sole Cavity
1.
Undo the flap and detach the fork (see
picture 4).
2.
Lift the insole (see picture 7). Place the
sensor with the Polar logo facing upwards
and the rear of the sensor facing the shoe
heel inside the sole cavity. Note that you
can place the sensor in only one way,
without using too much force.
E N G L I S H
2
Summary of Contents for s3 Stride Sensor
Page 2: ...O PEN O PEN 1 7 6 5 4 3 2...
