Polar Electro Polar3D, Manual, Page: 96 / 170

CHAPTER 5. UPDATING THE POLAR3D PRINTER 87
1. On the printer dashboard screen within the Polar Cloud;
Figure 5.1 .
2. On the printer manage screen within the Polar Cloud; Fig-
ure 5.2 .
Figure 5.2: Polar Cloud printer manage screen
UPDATE
button
3. On the printer’s local web interface ; Figure 5.3 .
Clicking the
UPDATE
button or
Update
tab in any of these
respective locations will cause the update to be performed.
Alternatively, you can force an update as follows. From a
device (computer, tablet, phone) on your local network, open a
browser window and go to the location:
http:// localip /update
where
localip
is your printer’s local IP address
2
. The effect
ers too will have an “
UPDATE
” button available on the printer dashboard and printer man-
age screen; see Section 9.5 : Updating the printer of the Polar Cloud Guide .
2
If you need a reminder of just what your printer’s local IP address is, note that from
within the Polar Cloud, clicking the “
LOCAL UI
” button while viewing a printer dashboard
screen will show you in the resulting browser window navigation bar what the Polar Cloud
believes to be the printer’s IP address.