CHAPTER 1. GET CONNECTED TO THE POLAR CLOUD
30
2.
POLAR3D
→
POLAR
3D
→
POLAR
3D
(the LED lights
cycled from entirely blue, to blue over red, before ending
as blue over yellow): the printer successfully connected to
your local network, but has not been able to connect over
the Internet to the Polar Cloud.
(a) Confirm with your network administrator that the printer
is being allowed access to
; if your local network normally blocks access
to those ports, the network administrator will need to
open up access for the printer.
(b) Check whether your site is having general Internet con-
nectivity problems – the printer can’t connect to the
Polar Cloud unless your Internet connection is operat-
ing!
