Polar Electro Polar3D, Manual, Page: 113 / 170

CHAPTER 6. POLAR3D PRINTER MAINTENANCE 104
calibration, the print head will be lowered to the build plate
and you will not have free room to remove the build plate; in
this case, click the “
Controls
” tab on the left-hand menu to go
to the “
Manual Printer Controls
” screen and at that screen
click the “
Raise Print Head
” (up arrow) button a few times;
see Figure 6.11 . Once you have room to do so, remove the build
plate from the printer.
Figure 6.11:
Manual Printer Controls
screen:
Raise Print Head
button
With the build plate removed from the printer, you are now
ready to begin x calibration, click the “
Calibration
” tab on
the left-hand menu to return to the “
Calibration
” screen. On
the “
Calibration
” screen (refer to Figure 6.4 ), click the “
Start
X Calibration
” button. This will bring up the screen shown
in Figure 6.12 ; click the “
Ok
” button to dismiss the screen.