Polar Electro LED 32, Service Manual

Page: 24 / 31

2011 ‐ 10 ‐ 23
1
V59 Factory Setting Maintenance manual
If you want to connect the Factory Setting menu, please press password “MENU+710”.
You can also press “EXIT” button to exit “Factory Setting” mode.
Factory Setting instruction
ADC ADJUST
To adjust the color temperature only in source VGA or
YPBPR.
PICTURE MODE
To Adjust Contrast, Color, Sharpness, Tint Dynamic
Backlight and Brightness.
W/B ADJUST White balance adjustment.
SSC Screen parameters adjustment.
SPECIAL SET Parameters adjustment.
VIF1 VIF1 Parameters adjustment only in TV
SW INFORMATION Software information.
UART DEBUG To control debug tool use COM port read registers on and off.
OverScan Only working in the current signal model.
NONLINEAR Analog nonlinear adjustment.
Software Update(USB)
When not insert USB and press Enter key menu ,it will
display "Can 't Detect USB".
Reset Default Factory and OSD menu reset.
BUILD TIME
Oct 19 2012,14:04:38
Writing software time
Panel Control
Panel LVDS TI MODE
、
LVDS Depth
、
LVDS Swap Port and so
on.
ASV59+620D Onboard model
VER001
LM230WF8_TLA2 Screen type