Polar Electro Ignite 3, User Manual, Page: 28 / 113

28
QUICK SETTINGS
Quick settings menu
Swipe down from the top of the display in time view to pull down the Quick settings menu.
Swipe left or right to browse and tap to choose a feature.
Tap to customize what features you want to see in the quick settings menu. Choose from
Screen lock , Alarm , Countdown timer , Do not disturb , Flight mode .
l
Screen lock : Tap the screen lock icon to switch screen lock on. Press the button for 2
seconds to unlock the screen.
l
Alarm : Set alarm repetition: Off, Once, Monday to Friday or Every day . If you choose
Once, Monday to Friday or Every day , also set the time for the alarm.
l
Countdown timer : Swipe up or down to set the countdown time, and tap the green tick to
confirm and start the countdown timer.
l
Do not disturb : Tap the do not disturb icon to switch it on and tap again to switch it off.
When do not disturb is switched on, you will not get any notifications or call alerts. Also,
the backlight activation gesture is disabled.
l
Flight mode : Tap the flight mode icon to switch it on and tap again to switch it off. Flight
mode cuts off all wireless communication from your watch. You can still use it, but you
can't sync your data with the Polar Flow mobile app or use it with any wireless
accessories.
Battery status icon shows how much charge is left in the battery.
During training
l
Backlight : Tap the Backlight icon to choose Always on or Automatic . With always on
selected the watch display will be illuminated throughout your training session. The
backlight setting will default back to automatic after you finish your training session.
Please note that the always on selection will drain your battery much faster than the
default setting.
l
Screen lock : Tap the screen lock icon to switch screen lock on. Press the button for 2
seconds to unlock the screen.
DISPLAY ICONS
Flight mode is on. Flight mode cuts off all wireless communication from your watch. You can still
use it, but you can't sync your data with the Polar Flow mobile app or use it with any wireless
accessories.
Do not disturb mode is on. When do not disturb is switched on, you will not get any notifications or
call alerts. Also, the backlight activation gesture is disabled.
Vibrating alarm is set. To set the alarm, go to Timers > Alarm .
Your paired phone is disconnected and you have notifications and/or music controls turned on.
Check that your phone is within Bluetooth range from your watch and Bluetooth is enabled on your
phone.
Screen lock is on. Press the button for 2 seconds to unlock the screen.