15
The display has an ambient light sensor that automatically adjusts brightness to suit the ambient light in
your surroundings.
ALWAYS ON DISPLAY
You can choose whether you want the screen to dimly show the time or to turn off completely when it's inactive. By
default, the screen turns off completely. To change the setting, go to
General Settings
>
Display always on
and choose
Show time
.
Please note that the always on (
Show time
) selection will drain your battery much faster than the default
setting.
Always on display is
disabled
, when
Do not disturb
is switched on.
To enable backlight always on during training:
Swipe down from the top of the display to pull down the
menu. Tap the Backlight icon to select
Always on
or
Automatic
. With always on selected the watch display will
be illuminated throughout your training session. The backlight setting will default back to automatic after you finish
your training session.
PAIRING A PHONE WITH YOUR WATCH
Before you can pair a phone with your watch, you need to setup your watch in the Polar Flow web service or with the
Polar Flow mobile app as described in chapter
. If you did the setup for your watch with a phone,
your watch has already been paired. If you did the setup with a computer and would like to use your watch with Polar
Flow app, please pair your watch and phone as follows:
Before pairing a phone:
l
download Flow app from the App Store or Google Play
l
make sure your phone has Bluetooth turned on, and airplane mode/flight mode is not turned on.
l
Android users:
make sure location is enabled for the Polar Flow app in the phone's application settings.
To pair a phone:
1. On your phone, open the Flow app and sign in with your Polar account, which you have created when setting up
your watch.
Android users
: If you have several Flow app compatible Polar devices in use, make sure you have
chosen Polar Ignite 3 as the active device in the Flow app. This way the Flow app knows to connect
to your watch. In the Flow app, go to
Devices
and choose Polar Ignite 3.
2. On your watch, press and hold the button in time mode
OR
go to
Settings > General settings > Pair and sync >
Pair and sync phone
and tap the display.
3.
Open Flow app and bring your watch close to phone
is displayed on your watch.
4. When the
Bluetooth Pairing Request
confirmation message appears on your phone, check that the code shown
on your phone matches the code shown on your watch.
5. Accept the Bluetooth pairing request on your phone.
6. Confirm the pin code on your watch.
7.
Pairing done
is displayed once the pairing is completed.
DELETE A PAIRING
To delete a pairing with a phone:
Summary of Contents for Ignite 3
Page 1: ...USER MANUAL...
Page 59: ...59...