background image

6

Car Refrigerator Operation

Temperature Adjustment Settings

•  Press touch screen to adjust the temperature inside the car refrigerator

•  Operation Method:

1. Press {On/Off} key for 3 seconds to turn on/standby the refrigerator.

2. Touch the {+ or -} key to adjust the temperature.

3. Press the {+ or -} key for a long time. The preset temperature is linearly 

adjusted with a speed of 2°C. During the adjustment, the number does not flicker.

4. Within 3 seconds after the operation panel has not detected any key operation, the 

temperature display will stop flashing, exit the temperature setting, and save the cur-

rently set 

temperature.

5. The temperature display shows the actual temperature inside the box

6. In the standby mode, only the {ON/OFF} button is on, and the temperature display 

and button 

light are off.

7. In working status, press {SET} key to perform MAX/ECO switching.

8. Temperature adjustment function: can be adjusted between -22 °C ~ +10 °C.

9. Temperature conversion: Press {set} and {+} 3 seconds at the same time Celsius 

(°C) \  

Fahrenheit (°F) temperature switch

10. Power protection mode: In the power-on state, press “Set” button for 3 seconds to 

enter the battery protection setting. Click “Set” button to switch H->L>M in turns , then 

corresponding gear flashes for 5 seconds, exits and saves. Recommend high level 

setting for car battery.

11. Note: please adjust the refrigerator parameters while unlocking. If the refrigerator 

is locked, 

press “set” up for 3 seconds to unlock it.

Troubles and Troubleshooting

 

Advice: If an abnormal situation cannot be resolved through simple fault analysis, 

please contact professional customer service for assistance.

 The car refrigerator does not work

1. Check whether if the power is connected correctly or not

    (If the plug is loose, positive and negative poles are reversed).

2. Check whether the power switch on the operation panel is turned on.

3. Check the cooling ventilation is normal.

4. Check whether if the fuse is blown or not.

Summary of Contents for D4325000

















Reviews: