background image

The Polar Speed Sensor W.I.N.D. is designed to
measure speed and distance when cycling. No
other use is intended or implied.

Please follow the pictures on the front cover.

Product Elements

1.

Polar Bike Mount and Cycling Computer
(picture 1 A)

2.

Polar Speed Sensor, rubber part and spoke
magnet (picture 1 B)

Installing the Polar Bike Mount and Cycling
Computer

You can install the bike mount and the cycling
computer on the left or right side of the
handlebar or on the stem.

1.

Place the rubber part on the handlebar or
stem and insert the bike mount on top of it
(picture 2).

2.

Pass the cable ties over the bike mount and
adjust them around the handlebar/stem.
Secure the bike mount firmly. Cut off any
excess cable tie ends (picture 2).

3.

Position the cycling computer on to the
bike mount. Turn the cycling computer
clockwise until you hear a click. You can
release the cycling computer by pressing it
down and simultaneously turning it counter
clockwise.

Installing the Polar Speed Sensor

To install the speed sensor and spoke magnet,
you will need cutters and a cross-head
screwdriver.

1.

It is recommended to install the speed
sensor on the front fork (as in picture 1) of
your bicycle. Do not install the speed
sensor on the seat stay if the (optional)
power sensor is mounted.

E N G L I S H

1

Summary of Contents for Cycling Computer









Reviews: