Technical specification / Instruction manual
W-536-S
5
III. Preparing for first use
The landing area elements are vacuum packed only for transport. Please unpack them immediately after delivery and
leave them in a roofed place for few hours, so that they can return to their original shapes.
Storing vacuum packed
landing area elements may cause permanent damages in their internal structures.
When the landing area elements
return to their original dimensions, you can place them in high jump field. The field surface should be even, smooth and
without any obstacles.
IV. Assembly
It is done in 4 easy steps:
place the first pad of mattresses assurance, two
of type A and one of type B
then fasten the pads with the clamping belts,
When the pads of first layer are connected,
then placed next layer, but started of the pad
type B
Finished layers of pads covered the PCV cover
with spike resistant surface if the training take
place in shoes with spikes or smooth surface if
you use normal footwear and also to protect
cover from the rain