Instruction manual
W-435
3/4
I. General description
POLANIK school landing area W-435 is top quality sports equipment which is designed to secure jumpers and absorb
impact energy of a jumper’s landing after take off and flight in high jump training.
II. Technical specification
Code
W-435
Dimensions length / width / height [m]
4 / 3 / 0,5
Weight [kg]
126 kg
Number of segments [pcs]
3
Spike resistant surface
upper surface of top pad is equipped with spike resistant mesh fabric
Segment covering
PVC, made of polyester with two vinyl layers
Internal structure
advanced 3-layer construction, made of high quality PUR foam
Way of segment linking
stainless steel hooks and D-rings
Way of waterproof cover linking
stainless steel D-rings
Carrying handles
very strong jacquard webbing, firmly attached by means of envelope
stitching
III. Preparing for first use
The landing area elements are vacuum packed only for transport. Please unpack them immediately after delivery and
leave them in a roofed place for few hours, so that they can return to their original shapes.
Storing vacuum packed
landing area elements may cause permanent damages in their internal structures.
When the landing area elements
return to their original dimensions, you can place them in high jump field. The field surface should be even, smooth and
without any obstacles. If you use the landing area outdoors, you should also provide: a special waterproof cover P-435 to
protect the landing area against unfavourable weather conditions and a modular platform SW-4x3 to insulate the
landing area from the ground.
IV. Assembly
It is done in the following way:
place the main segments of the landing area in the high
jump facility,
using the jacquard webbing belts and self-locking buckles
located on the segment sides fasten the segments to each
other,
place the top pad on the landing area main segments,
then fasten the top pad to the main segments using the
snap hooks and D-rings,
now the landing area is ready for use.
