STT11-65E
–
wireless operation
User manual
12/22
Now remove the safety bars and store them for further use. They are helpful
during disassembly and transport.
If the positions of the PV stands are checked and final, their bases must be fastened to the ground using the mounting
holes of the flat bars of the bases.
The omission of that operation may cause stands overturn and result in serious accident or damages
.
It is recommended that the bases are fastened to the ground with hex nut head steel sleeve anchors dia. 16 mm and
length 140 mm (holes must be of dia. 16 mm and 130
–
150 mm deep). The concrete base is to be dry and non-
cracked. For t
he installation of the anchors please see their producer’s instruction.
The stands are ready for assembling the cabling.
safety bar screws
safety bar immobilizes
the trolley
holes to fasten the base to the ground
