Technical specification / Instruction manual
PVLID-S
4/4
If a synthetic surface piece is to be sprayed or poured on the lid, please place thick foil in the box first, then put the lid
into the box and secure the wider edge with adhesive tape. Next install the surface and leave it to dry.
IV. Packing and transport
The product is packed in foil and transported on a pallet.
V. Maintenance
It is a maintenance free product.
PRODUCT SUPPORT: Pawel Ciechanowski
Even the best technical solutions cannot substitute for common sense. The usage of the product must take place
under the supervision of sports facility technical staff. The producer shall not be liable for any incidents caused by the
improper assembly or its misuse. The producer reserves the right to introduce without warning changes in product
constructions and colours.
File: 2016-12-20
© 2016 Polanik
synthetic surface
glued to the lid