Instruction manual RT 2014
POL-EKO-
APARATURA sp.j. • ul. Kokoszycka 172 C • 44-300 Wodzisław Śl. • tel./fax +48/ 32 453 91 70 • e-mail
10
5.2.2
Installation of microSD card
Insert the microSD card till you hear ‘click’ then the card is installed
properly.
Supplied memory card is formatted and ready to use.
Supported cards are up to 8
GB. Recommended file system is „FAT16”.
5.2.3
Installation of GSM or WiFi antenna
GSM or WiFi Antenna has right-handed thread and installation is done
by screwing the nut antenna (A) to antenna socket GSM / Wi-Fi (see Chapter 4). The antenna screw
on "fingers". Not allowed turn the a black plastic antenna housing.
GSM Antenna
WiFi Antenna
5.2.4
Start-up of the unit
After switching on the unit (switching on is made by clicking and holding
button), GSM module will
try to connect to mobile operator.
icon informs about looking for network and trying to connect.
After about a minute, the module
should already be connected to the mobile network - the icon will change to
. The device is ready
for operation.
If the GSM module does not connect to the mobile network, use a different card operators or if possi-
ble, move the device closer to the window.
Not allowed turn the a black plastic GSM antenna housing.
It is recommended to control if the antenna does not unscrew itself during use. Unscrew-
ing the antenna may damage the device.
Before use you should:
•
put active SIM card in the slot,
•
put microSD card in the slot,
•
screw the GSM or WiFi antenna,
•
charge the battery
A
Housing
