Pokini FT 7M, Manual

Page: 4 / 40

Deutsch
4
Declaration of Conformity
The CE symbol on your product indicates that it is in compliance with the di-rectives of the Union European (EU). A
Certificate of Compliance is available by contacting Technical Support.
This product has passed the CE test for environmental specifications when shielded cables are used for external
wiring. We recommend the use of shielded cables.
FCC Class B
This device complies with Part 15 of the FCC Rules. Any changes or modifica-tions not expressly approved by the
guarantee of this device could void the user’s authority to operate the equipment.
RoHS
Certifies that all components in its products are in compliance and conform to the European Union’s Restriction of
Use of Hazardous Substances in Electri-cal and Electronic Equipment (RoHS) Directive 2002/95/EC.
Safety Symbols
This symbol of “CAUTION” indicates that there is a danger of injury to the user or a risk of damage to
the product, should warning no-tices be disregarded.
Battery Recycle
This symbol indicates electrical warning.
Important Safety Instructions
• Read all cautions and warnings on the equipment.
• Place this equipment on a reliable surface when installing. Dropping it or letting it fall may cause damage.
• Make sure the correct voltage is connected to the equipment.
• For pluggable equipment, the socket outlet should be near the equipment and should be easily accessible.
• Keep this equipment away from humidity.
• Disconnect this equipment from the A/C outlet before cleaning it. Use a moist cloth. Do not use liquid or sprayed
detergent for cleaning.
• Do not scratch or rub the screen with a hard object.
• Never use any of the solvents, such as Thinner Spray-type cleaner, Wax, Benzene, Abrasive cleaner, Acid or Alkali-
ne solvent, on the display. Harsh chemicals may cause damage to the cabinet and the touch sensor.
• Remove the dirt with a lightly moistened cloth and a mild solvent detergent. Then wipe the cabinet with a soft dry
cloth.
• If the equipment will not be used for a long time, disconnect it from the power source to avoid damage by tran-
sient over voltage.