©2011 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUC
TIO
NS
TJ/LJ TRAILGATE INSTALLATION
Thank you for purchasing a Poison Spyder
TrailGate™ for your Jeep. Installation is fairly
simple with the right tools and good mechanical
abilities. If you are not confident in your
mechanical skills, please seek the help of a
professional to perform the installation. Please
read through these entire instructions before
proceeding with installation.
IMPORTANT: Completely install and remove the
TrailGate™ prior to painting or powder coating it.
This will allow you to check for fitment or do any
clearancing or fitting ahead of time, to reduce
the chance of damage to the finish during final
installation. Poison Spyder Customs Inc. is not
responsible for costs for or damage to paint or
powder coat finish under any circumstances,
including paint or powder coat of incorrectly
shipped or defective parts.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(1) TrailGate™ Gate Panel
(1) TrailGate™ Tramp Stamp™
(1) Latch Cover Left
(1) Latch Cover Right
(2) Tub-Side Cable Bracket
(2) Gate-Side Cable Bracket
(2) Limit cable
(2) Hinge
(2) Lock-latch assembly
(2) Weatherstrip
(1) 1/4-20 nut-sert install tool
(1) 5/16-18 nut-sert install tool
(2) 5/16-18 X 1 SS button head cap screw
(2) 5/16-18 nut-sert
(12) 1/4-20 X 3/4 SS button head cap screw
(12) 1/4-20 nut-sert
(8) 1/4-20 nylon insert lock nut
(4) 1/4 flat washer
(12) 10-32 X 1 SS button head cap screw
(12) 10-32 nylon insert lock nut
(14) #10 flat washer
(2) M5-.8 X 50 hex head cap screw
