USB Cable
B
USB end
USB micro end
Pointy Box
A
1
Find where your barcode scanner connects to your POS
(if unsure,
carefully follow the cable from your barcode scanner to your POS)
.
IMPORTANT:
Make note of this exact connection port for step 4.
Then
disconnect the barcode scanner.
2
Connect the barcode scanner to the Pointy Box.
A
3
Connect the micro end of the USB Cable to the Pointy Box.
B
A
4
Connect the other end of the USB cable to the POS.
IMPORTANT:
Connect the USB cable back into the same USB port from step 1.
WARNING:
Please ensure that the barcode scanner plugs directly into a USB
port. There must be no adapters between the barcode scanner and the POS.
B
WARNING: DO NOT USE ANY EXISTING
ADAPTERS THAT MAY BE IN PLACE ON
THE USB CABLE.
There must be no adapters between the
barcode scanner and the POS.
What’s inside:
USB
Setup
The Pointy Box connects between your barcode scanner and
Point of Sale. Just follow the steps below:
5
Wait for the Pointy box to show a solid green light, then test scan five
or more items.
It can take 3-5 minutes for the solid green light to show. Once you scan some items
you should get an email confirming your device has been activated. We have also
included a sticker for your store window, hopefully you have space for it!
1
B
A
2
3
4
Need Help
Email us at:
or visit:
pointy.com/retailer/contact-us