Charging the Device
1. Assemble the AC plug, power adapter and USB cable.
2. Connect the cable to the USB connector of PM351.
3. Provide power by plugging the power adapter to the wall
socket.
PM351 can also be charged with charging cradle
(sold separately).
LED Indicator
< Caution >
1.
Always use an original power supply from Point Mobile. Other
chargers and cables may damage the PM351.
The device warranty does not cover any damage caused by the
usage of non-original power supplies.
2.
Make sure the charger and cable is not wet.
2
No Indicator
Status
Indication
1
Power
LED
Solid green
Device is fully charged
Solid red
Charging the device / Battery is low
Blinking red
Charging temperature is out of
normal range / Battery is very low
Alternately blinking
red
&
green
Cannot recognize the battery
2
Notification
LED
Solid red
Device entered hot swap mode
Blinking blue
Notification existing
Red flash
Barcode reading failed
Blue flash
Barcode reading success
1
