4.2 Main controls and parts of the radio
LCD Display
1.
Received signal strength.
2.
power.
3.
Appears when
DTMFST (DT-ST / DT + ANI / ANI-ST)
is activated.
4.
These symbols show that you set a
DCS
or
CTCSS
code in tx or rx. In tx mode it appears while you are transmitting, while in
rx mode it is shown also in stand-by condition.
5.
Appears when a
positive shift
is activated.
6.
Appears when a
negative shift
is enabled.
7.
This letter is displayed when the
Dual Watch
function is active.
8.
This icon indicates the
keypad lock
. To unlock it press
[
*
]
.
9.
VOX
function enabled.( GMRS version does not support)
10
.
Reverse
frequency
11
.
Narrow bandwidth:
N = narrow.
12.
Battery level indicator.
When the battery is almost used up, the icon starts blinking and the transmission is blocked.
Charge the radio.
Summary of Contents for P15UV
Page 1: ......
Page 15: ...4 RADIO OVERVIEW...
