poewit.com
INSTALLATION AND SETUP
4
2) INSTALLATION AND SETUP
1. Select a proper location for light fixture and other connected devices.
2. Install Category Cable (CAT5e/6/7) from your PoE-enabled router
or broadband modem to the location selected for light installation.
3. Loosen the three screws holding the light housing back
mounting plate. See figure 1
4. Insert category cable into PoE light driver and pull the light
driver cable through the back mounting plate opening. Mount
the back mounting plate to the wall with the three screws.
See figure 2
Fig 1.
