POD LPHS300BK, Instruction Manual

Page: 12 / 24

12 ∙ setting up your portable steamer
SETTING UP YOUR PORTABLE STEAMER
BEFORE FIRST USE:
• Remove any sticker or protective cover from the Steam Head.
• Unwind and straighten the cord before use.
• When operating the Portable Steamer for the first time, allow it to
steam for a few minutes. This will remove any impurities and odors that
may have been left by the manufacturing process.
• When operating the Portable Steamer for the first time, you may
want to try the steamer on an old piece of fabric before steaming your
Portable.
• Warning: to avoid an electrical circuit overload, it is recommended that
no other appliances are plugged into the same circuit as your Portable
Steamer when it is in use.
Note:
when unpacking the Portable Steamer, check to see you have re-
ceived all the items listed in the parts list before discarding the
packaging.
GETTING STARTED:
1. Rotate and pull out the Water Tank, open the Water Inlet Cover, and fill
with tap water until it reaches the MAXIMUM level. Always ensure the
Water Tank is at least a third full. Do not exceed the MAXIMUM level
when filling the Water Tank.
2. Hold the appliance with your hand positioned safely at the neck of the
Portable Steamer. Use your other hand to attach the Fabric Brush onto
Setting up your portable steamer