POD BREWER
CUBE
28
CUBE
Note: This operation may be dangerous if other substance are used
instead of vinegar or approved de-scaling materials recommended
for household coff ee makers.
CLEANING
•
Use a damp cloth to clean the body of the machine and do not
use abrasive detergents.
•
Remove the capsule box and drain tray (no 5,7 Figure 7) empty
any capsules and wash them with an ordinary dishwashing
detergent.
•
Periodically remove the water tank (no 8 Figure 4) and rinse it with
clean water then put it back properly in its place.
TROUBLESHOOTING
If the machine is not working properly make the simple checks
set out below. If the problem is not among those listed or if it still
persists, even if you follow the advice given, contact an authorized
dealer.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
•Machine won’t start
• Not properly plugged into
the power
• Make sure it is properly
plugged in.
•The coffee is too cold.
• The machine is not ready.
• Wait until the temperature is
reached, shown by the
indicator light.
•Coffee is not being
dispensed or it is being
done too slowly.
• Not enough water in the
tank
• Make sure that the level of
the water in the tank is right
and, if necessary, add cold
natural water.
Summary of Contents for CUBE 3A-C225E
