PG-2092P USER MANUAL VER:1.0 5 OF 11
The pager will automatically return to standby mode in 8 seconds, if no key is pressed.
4.1.
Receiving and reading messages
Press
Read / Exit Key
to read message. “NO PAGE” indication appears on its LCD
when no messages are present.
When the pager has received message(s), the number of unread message appears on its LCD:
This display indicates 2 unread messages in the pager are waiting for being read, at the same time,
a short unread alert will remind you of the unread messages. The number at the bottom left corner
displays the serial number of a received message. When you press
Read / Exit Key
, the
content of the message appears on its LCD.
Press
Read / Exit Key
to display the message.
◆
The LCD displays message: [message: 861 579 0234], the digit at the bottom left corner
indicates the 8
th
message, press
Read / Exit Key
again to display the time message was
received [receiving time: 12:36 of March 27.]
The digit at the bottom left corner indicates the 1
st
address code.
If you press
Read / Exit Key
and TONE ONLY is displayed, this indicates the call is an
audio only call.
Press
Setting / Selection Key
to read the next message.
You can press
Function Key
to return to standby mode while reading message. Your
pager can automatically store received messages, including the receiving time and date.
When its memory is full, “MEMORY FULL” indication will be displayed on standby mode.
In this case, a new message will overwrite the oldest message unlocked.
If the pager is full of unread messages and one or more unread messages have been
overwritten by newly received messages, the “OVERFLOW” indication will be displayed on
its LCD.
