PocketBook 302
User Manual
9
A
UDIO
O
UTPUT
Plug headphones or speaker system (speakers) to the appropriate slot on the device casing (see
picture on page 5) to listen to audio files on POCKETBOOK 302. The slot is designed to connect
the jack plug 3,5 mm. To connect the headphones with 2,5 mm jack plug you should use a
special adapter.
R
ESET
Press with the stylus the button in cavity on the device back near the battery cover to force
restart of device.
G
ET STARTED WITH
POCKETBOOK
302
The information in this section duplicates the manual "Quick Start" included to
POCKETBOOK 302 Kit. If you're already familiar with it, you can skip this section and proceed to
the next.
S
TEP
1.
C
HARGE THE
D
EVICE
The first time the device should be charged in off-state from 8 to 12 hours.
POCKETBOOK 302 can be charged from a computer via mini-USB cable, or from the power
network using power adapter.
To charge the device for the first time you should perform the following sequence of steps:
1.
Make sure the device is switched off and the LED is not lit. If the device is switched on,
press and hold for a few seconds the button "Power".
2.
Connect the device to your computer / network with corresponded cord.
3.
The indicator turns red or orange, as soon as charging starts.
4.
The indicator will turn green or turns off when the device is fully charged.
5.
Now you can disconnect the device and switch it on for the first use.
If the device stays in switched-on state during charging, you will see a request on the
Pocketbook screen to select the type of connection - battery charging or connection for data
transfer. Charging starts only if you select the appropriate mode.
S
TEP
2.
S
WITCH ON THE
D
EVICE
Press and hold the button "Power" to switch the device on. During the switching-on a screen-
saver will be displayed on screen. When the device is ready to work the image will be replaced
by main menu, which represents the last 2 open book and main features of POCKETBOOK 302.
The detailed information about individual functions presented here, you can read in the e-book
Complete User Guide
loaded into the memory of your device.
S
TEP
3.
R
EAD THE
C
OMPLETE
U
SER
G
UIDE
Complete User Guide
is loaded to internal memory, so you can look at it at any time and find a
detailed description of the features that you can use.
