-7-
8.
CONNECTING TO TELEPHONE SOCKET
When the setting up instructions have been completed, connect the plug at the end
of the telephone lead into the telephone socket. The plug will only fit the correct way
round.
9.
SETTING THE CLOCK
1.
Lift the handset or press the headset button.
2.
Enter the clock settings mode.
3.
Current time will be displayed with the two hour displays flashing
4.
Press * button to increase hour one by one, press and hold down the * button for
the hours to scroll from 0-12 and from AM to PM. A=AM P=PM.
5.
Press # button to complete hour settings and enter minute settings
6.
Press * to increase the minutes one by one, press and hold down the * button for
the minutes to scroll through digits 0-59.
7.
Press * once to complete clock settings.
8.
Replace the handset or press the headset button.
10.
SETTING THE RINGER
RINGER OFF/LO/HI switch.
Set the switch to the LO or Hl position as desired to give a quiet or loud ring. The
Ringer may also be switched OFF by setting the switch to the OFF position.
Outgoing calls may still be made with the switch set to the OFF position.
RINGER PITCH switch.
Set the switch to the Hl, MED or LO position to adjust the pitch of the ringer.
11.
WALL MOUNTING
You may wish to mount the Executive NR201HPUK Headsetphone on a wall. To do
this:
-
Slide the plastic, “wall mount” upwards to remove, turn it around and replace it
in the slot.
-
The Handset will then stay in the cradle when the telephone is on the wall.
-
Position screw into the wall ensuring that the screw head is 5mm from the wall.
-
Place the telephone on the screw using the keyhole slot on the rear of the
telephone.
NR201HPUK User Guide 24/6/03 5:18 pm Page 9
