16
To save frequencies to channel memory you must be in Frequency (VFO) mode. Memory mode is sometimes also referred to
as Channel mode.
•
[
▲
]
key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this
control to move the scanning upwards.
•
[
▼
]
key: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN
mode, press this control to move the scanning downwards.
•
[EXIT/AB]
key: press to exit the Menu and functions. A/B (appears on the display): push to select the desired frequency
(VHF or UHF) in the main or secondary display. When listening to broadcast FM, the
[EXIT/AB]
key switches between 65-75
MHz and 76-108 MHz band.
•
Numeric keypad
With these keys you can input the information or your selections on the radio. In tx mode, push the number keys to send a
corresponding DTMF code.
•
*SCAN Key
A short momentary press of the key enables the reverse function.
When listening to broadcast FM a momentary press will start the scanning. Scanning in broadcast FM will stop as soon as an
active station is found, regardless of scanner resume method.
