3
3. Operating settings.
3.1 Power supply: 12/24V DC or 110~240V AC
(
by adapter
)
3.2 Power cable connection:
3.3 Operation setting:
--ON/OFF: press the ON/OFF button for 3 seconds to start the unit.
Press the ON/OFF button for 3 seconds to turn it off.
--Press the UP or DOWN button to adjust target temperature. Press the UP button
to increase or DOWN button
to decrease the temperature.
--"SET" BUTTON: Press the "SET" button to enter the economy running mode:
1.
ECO (Energy-saving mode)
2. HH (Quick cooling mode)
--Indicator light:
1. Power indicator red light: the compressor is stopped.
2. Power indicator green light: the compressor is working.
3. Eco/Max indicator red light
:
quick cooling mode is running
.
4. Eco/Max indicator green light: Energy-saving cooling mode is running.
--Battery Protection: Selecting the H1, H2, H3 positions, you can choose different levels
for battery protection. When the unit is on working, press the "SET" button for 3 seconds,
then the LED will display as below:
H1: Low power protection.
H2: Middle power
H3: High power protection (factory default)
When the unit is connected to the car, we suggest setting the battery protection to H3
(H) level. H2 (M) and H1 (L) are suggested when the unit is connected to the backup battery
.
If on the LCD is displayed “F1”, then set the battery protection from H3 to H2 or H1
Most cars will stop power supply if engine is stopped
.
But some cars will continue
power supply after you turn off the car. If your refrigerator is still working after the car has
stopped, you should adjust the battery protection to H3 (H), otherwise it may drain your car
battery.
